最火聚硫密封胶的嵌缝施工方法地刷韩城铝支架塑封机粘度杯Frc

聚硫密封胶的嵌缝施工方法

您当前位置：首页 企业聚硫密封胶的嵌缝施工方法

聚硫密封胶的嵌缝施工方法来源:衡水明兴工程橡胶有限公司日期:作者:Double component polysulfide sealant, polysulfide waterproof seal, polysulfide sealant

双组份聚硫密封胶、聚硫防水密封膏、聚硫建筑密封胶 Double component polysulfide sealant, polysulfide waterproof seal, polysulfide sealant 公司生产的双组份聚硫密封胶、聚硫建筑密封膏均严格执行国家标准JC/T、GB/T13477..精密丝杠副传动；2是普通皮带传动002标准生产。 The two components polysulfide sealant and polysulfide building sealing paste produced by the company are strictly implemented by the national standard JC/T and GB/T13477.. standard. 双组份聚硫密封胶这种密封材料主要是以液态聚硫橡胶为原料，添加多种化学助剂经特殊高分子材料合成工艺制作而成，是一种新型的无毒无污染的防水密封材料。 Two component polysulfide sealant is a new type of non-toxic and non polluting waterproofing and sealing material, which is made from liquid polysulfide rubber and various chemical AIDS. （一、）市场上常见的这种聚硫防水密封胶，一般为A、B两组份组成。它的使用比例为（A）10:（B）1。A组份为白色膏状物，B组份（固化剂）为黑色膏状物。 (one,) the common polysulfide waterproofing sealant in the market is usually composed of two components, A and B. The proportion of its use is (A) 10: (B) 1. The A components were white paste, and the B component (curing agent) was black paste. （1、）这种国标型双组份聚硫密封膏的A、B两组份混合后，混合物的性能：不下垂，高伸长，低模量的聚硫建筑密封膏完全固化后为橡胶状高弹性体。 (1), after mixing the t杭州wo components of the national standard two component polysulfide sealing paste A and B, the performance of the mixture is: no droop, high elongation and low modulus of the polysulphide building sealant, after being solidified, it is a rubber like high elastic body. （2、）随季节变化，地域气温的变化，可用B组份固化剂用量的多少来调节试用期的长短，B组份的变动范围在8--12之间，即B组份越多，固化时间越快。 (2), with seasonal changes, the change of regional temperature can adjust the length of trial period with the a万向脚轮mount of B curing agent. The variation range of B components is between 8--12, that is, the more B components are, the quicker the curing time is. （二、）公司根据各种聚硫密封膏的固化特性与施工作业性研制的两种双组份聚硫密封膏： (two) two kinds of double component polysulfide sealing ointment made by t因骤热冷却he company according to the curing characteristics of various polysulfide sealing plaster and the construction workability: l聚硫建筑密封膏 L polysulf密封设备ide building seal ointment 1、试用期：h 1, probation period: h 2、表干时间：≤24h 2, dry time: less than 24h 3、下垂度：≤3mm 3, sag: less than 3mm 4、拉伸粘结性：最大拉伸强度：≥0.2MPa，最大伸长率：≥200% 4, tensile adhesion: maximum tensile strength: more than 0.2MPa, the maximum elongation is not less than 200% 5、低温柔性：-30℃ 5. Low temperature flexibility: -30 C 6、弹性恢复率：≥80% 6, the elastic recovery rate: 80% 7、比重：1.6±0.1g/m3 7. Proportion: 1.6 + 0.1g/m3 l聚硫防水密封膏 L polysu2、纳米氧化锌lfide waterproof seal ointment 1、试用期：h 1, probation period: h 2、表干时间：≤24h 2, dry time: less than 24h 3、下垂度：≤3mm 3, sag: less than 3mm 4、拉伸粘结性：最大拉伸强度：≥0.6MPa，最大伸长率：≥100% 4, tensile adhesion: maximum tensile strength: more than 0.6MPa, the maximum elongation is not less than 100% 5、水蒸气渗透率：≤15g/㎡.d 5, water va瓷棒por permeability: less than 15g/ square meters.D 6、紫外线辐射：水浸后定伸粘结性能（定伸125%）无破坏 6, ultraviolet radiation: the adhesion of water after water immersion (fixed extension 125%) without destruction 7、比重：1.6±0.1g/m3 7. Proportion: 1.6 + 0.1g/m3 （三、）公司根据市场上对不同建筑物施工颜色的需求，经过我公司多年反复科研，终于研制成功出可以调配颜色的双组份聚硫密封膏（胶）。同样为A、B双组份，A组份为桶装白色膏状物，B组份固化剂为瓶装透明液体。我公司研制的B组份固化剂不同与市场上同类聚硫密封膏B组份固化剂为单一黑色。在使用我公司这种产品的时候，我公司为方便施工要求，颜色单独盒装，一盒对一组。 (three) according to the dem或本机不能对其进行实验.and of different colors for building construction, our company has successfully developed two components of polysulfide sealing paste (glue) that can be coloured according to market demand for different construction colors. The same is A, B double components, A component is barreled white paste, B component solidifying agent is bottled transparent liquid. The B solidifying agent developed by our company is different from that of the same kind of polysulfide sealing paste B in the market, and the curing agent is single black. In the use of our company this product, our company for convenience of construction requirements, color alone box, a box of one set.